Overview - ATF Circuit, Version 1
WARNING: This page is about a different car, the 2024 Audi S5, 2024 Audi RS 5, 2023 Audi S5, and 2023 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.
- ATF Line
- Cleaning. Refer to Cleaning .
- Install all the way by hand with a new O-ring
- O-Ring
- Replace if the ATF line leaks
- Coat with ATF before installing
- ATF Cooler
- Removing and Installing. Refer to ATF COOLER, REMOVING AND INSTALLING .
- Bolt
- 8 Nm
- O-Ring
- Replace if the ATF line leaks
- Coat with ATF before installing
- O-Ring
- Replace if the ATF line leaks
- Coat with ATF before installing
- ATF Line
- Cleaning. Refer to Cleaning .
- Install all the way by hand with a new O-ring
- Bracket
- Bolt
- 20 Nm
- O-Ring
- Replace if the ATF line leaks
- Coat with ATF before installing
- Bolt
- 20 Nm
Disconnect the ATF Line
-- Release the clip -1- from the connector coupling -2- in direction of -arrows B- and lift in direction of -arrows A-.
-- Remove the connector coupling.