ATF Lines, Removing And Installing: Cleaning
WARNING: This page is about a different car, the 2024 Audi S5, 2024 Audi RS 5, 2023 Audi S5, and 2023 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.
- Follow the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .
-- Before installing a replacement transmission, always clean out the ATF cooler and ATF lines using compressed air (maximum 10 bar (145 psi)).
-- Place the :SMN372500 under the transmission.
- If extremely dirty ATF flows out when cleaning using compressed air, flush the ATF cooler and lines using clean ATF.
Tightening Specifications