Brake System Pressure Reservoir -VX70-, REMOVING AND INSTALLING: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

Clean bolts before reusing.
Replace damaged bolts.
Always replace self-locking bolts.

-- Pre-bleed the new Brake System Pressure Reservoir -VX70- before installing. Refer to Brake System Pressure Reservoir -VX70-, PRE-BLEEDING .

-- Remove the : VAG1869/2 .

-- Bleed the brake system. Refer to HYDRAULIC SYSTEM, BLEEDING .

NOTE:

Remove all cloths from the vehicle that were previously placed down.

WARNING:

Risk of accident!

Make sure the brakes are working correctly before driving the vehicle for the first time.