Component Location Overview - Heat Shields
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2022 Audi RS 7 Sportback, 2022 Audi A7 e Quattro, 2022 Audi A7 Quattro, 2021 Audi S7, and 2021 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
- Heat Shield
- For the rear muffler
- Tightening Specifications:
- Spring nuts: 2 Nm
- Heat Shield
- Rear floor
- Tightening Specifications:
- Spring nuts: 2 Nm
- Heat Shield
- For the driveshaft
- Heat Shield
- For the tunnel rear
- Removing and Installing. Refer to HEAT SHIELD FOR REAR TUNNEL, REMOVING AND INSTALLING .
- Heat Shield
- For the tunnel center
- Tightening Specifications:
- Spring nuts: 2 Nm
- Lock Washer
- Heat Shield
- For right front tunnel
- Lock Washer
- For right front tunnel
- Heat Shield
- For right front longitudinal member
- Tightening Specifications:
- Nut: 9 Nm
- Clip
- Heat Shield
- For the plenum chamber bulkhead
- Lock Washer
- For the plenum chamber bulkhead
- Heat Shield
- For left front longitudinal member
- Clip
- For left front longitudinal member
- Heat Shield
- For left front tunnel
- Lock Washer
- For left front tunnel
- Heat Shield
- Tightening Specifications:
- Spring nuts: 2 Nm
- Tightening Specifications: