Bumper Cover, Removing And Installing: Notes
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2022 Audi RS 7 Sportback, 2022 Audi A7 e Quattro, 2022 Audi A7 Quattro, 2021 Audi S7, and 2021 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
- To complete the procedure, a second technician is required to be at the following position found here. Refer to Disengage the side piece from the front side panel -arrow A- and remove the bumper cover -1- with the help of a second technician -B arrows-. .
- Depending on the equipment version, the following additional work must be performed. Refer to Depending on the version, the following additional procedures are required: .
Special tools and workshop equipment required
- Engine Bung Set:VAS6122