Engine, Removing From Scissor Lift Table
WARNING: This page is about a different car, the 2022 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Lifting Tackle: 3033
- Shop Crane: VAS6100
- Lift Arm Extension: VAS6101
Procedure
- Engine/transmission assembly removed and separated on : VAS6131B . Refer to ENGINE AND TRANSMISSION, SEPARATING .
CAUTION:
Risk of injury due to the engine weight shifting.
Parts of the body could be crushed.
- Transport the engine only without the transmission using the method described.
-- Attach the : VAS6101 to the : VAS6100 .
-- Engine the : 3033 as shown in the engine lifting eyes and on the shop crane.
-- Pry up the engine with the workshop crane.