LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> S7 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Exterior Lights, Switches) >> 94 Exterior Lights, Switches >> Headlamps >> Headlamp, Removing And Installing >> Headlamp Housing, Removing And Installing >> Removing

Headlamp Housing, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2022 Audi RS 7 Sportback, 2022 Audi A7 e Quattro, 2022 Audi A7 Quattro, 2021 Audi S7, and 2021 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn the light switch off.

-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Remove the headlamp cover. Refer to OVERVIEW - PLENUM CHAMBER COVER .

-- Right: free up the washer fluid hose -1- for the headlamp washer system -arrows-.

GWWA94-12284Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the washer fluid hose at the washer nozzle.

-- Remove the screws -arrows-.

GWWA94-12285Courtesy of AUDI OF AMERICA, LLC

-- Free up the breather hose -1-.

-- Pull the headlamp housing -2- forward slightly and disconnect the connector.

-- Remove the headlamp housing.