Rear Coolant Pipe 2, Removing And Installing: Installing

WARNING: This page is about a different car, the 2022 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

Replace the O-ring after removing.
Used coolant cannot be used again.

-- Coat the new O-ring with coolant.

-- Install the catalytic converter. Refer to CATALYTIC CONVERTER, REMOVING AND INSTALLING .

-- Connect the coolant hose to the connector coupling. Refer to Figure.

-- Fill with coolant. Refer to Coolant, Filling .