Overview - Cylinder Head

WARNING: This page is about a different car, the 2022 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.

All components are described. Refer to OVERVIEW - CYLINDER HEAD .

Wiring Harness on Cylinder Head - Tightening Specification

Component Location: on the Front of the Engine, Cylinder Bank 1 (Right)

Fig 1: Component Location: on the Front of the Engine, Cylinder Bank 1 (Right)

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts -1- to 9 Nm.

Component Location: on the Front of the Engine, Cylinder Bank 2 (Left)

Fig 2: Component Location: on the Front of the Engine, Cylinder Bank 2 (Left)

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts -arrows- to 9 Nm.