Cylinder Bank 2 (Left) Camshaft Timing Chain
WARNING: This page is about a different car, the 2022 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
- Mounting Pin
- 23 Nm
- Tensioning Rail
- Camshaft Timing Chain
- Mark the running direction with paint for reinstallation
- Removing from the camshafts. Refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
- Removing and Installing. Refer to CAMSHAFT TIMING CHAIN, REMOVING AND INSTALLING .
- Chain Tensioner
- Removing and Installing. Refer to CHAIN TENSIONER, REMOVING AND INSTALLING .
- Bolt
- 9 Nm
- Seal
- Replace after removing
- Gliding Piece
- Replace after removing
- Control Valve
- For the camshaft adjuster
- Tightening specification and sequence. Refer to Installing .
- O-Ring
- Replace after removing
- Camshaft Adjuster
- For the intake camshaft
- Allocation. Refer to the Parts Information.
- After removal replace the friction disc (diamond disc) -item : Friction Disc (Diamond Disc)
- Removing and Installing. Refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
- Friction Disc (Diamond Disc)
- Replace after removing
- For the connection security between the camshaft adjuster and camshaft end
- Bring the new friction disc (diamond disc) without kinking into its installation position
- Friction Disc (Diamond Disc)
- Replace after removing
- For the connection security between the camshaft adjuster and camshaft end
- Bring the new friction disc (diamond disc) without kinking into its installation position
- Camshaft Adjuster
- For the exhaust camshaft
- Allocation. Refer to the Parts Information.
- After removal replace the friction disc (diamond disc) -item : Friction Disc (Diamond Disc)
- Removing and Installing. Refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
- O-Ring
- Replace after removing
- Control Valve
- For the camshaft adjuster
- Tightening specification and sequence. Refer to Installing .
- Guide Rail
- Bolt
- 9 Nm
- Toothed Gear
- With the chain sprocket for the camshaft timing chain