Solenoid Valve Block, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
- Follow the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .
-- Vent the system. Refer to AIR SUSPENSION SYSTEM, FILLING AND BLEEDING .
-- Switch off the ignition.
-- Remove the nuts -arrows-, and remove the cover -1- for the air supply unit.
-- Disconnect the connector -3- from the solenoid valve -1-.
-- Remove the air lines -2- and -arrows- and protect them from dirt.
-- Remove the bolts -arrows- and the solenoid valve -1- from the bracket -2-.