Air Suspension System, Filling And Bleeding
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Vehicle Diagnostic Tester
Bleeding
-- If the air suspension system is bled, select the "Air Suspension System, Bleeding" program. Refer to DIAGNOSTIC ENTRIES .
-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.
Filling
-- To fill, proceed in the same way under "Air Suspension System, Filling". Refer to DIAGNOSTIC ENTRIES .
- Note the installation position of the air springs when filling them Refer to Fig 1.