LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> S6 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 430 (Engine Assembly [DKNA,DLHA,DLHB,DKWB]) >> 10 Engine Assembly >> Assembly Mounts >> Overview - Assembly Mounts >> Overview - Dual Clutch Transmission Mount

Overview - Dual Clutch Transmission Mount

WARNING: This page is about a different car, the 2021 Audi A6 Quattro, 2020 Audi A6 Quattro, and 2019 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exploded View Of Dual Clutch Transmission Mount, Version 2
GWWA10-12185Courtesy of AUDI OF AMERICA, LLC
  1. Bolt
    • Tightening specification. Refer to the appropriate Service Information .
  2. Tunnel Crossmember
    • Removing and installing. Refer to the appropriate Service Information .
  3. Bolt
    • Tightening specification. Refer to the appropriate Service Information .
  4. Stop
    • For the transmission mount
  5. Transmission Mount
  6. Nut
    • Only remove when the transmission mount must be separated from the transmission support
    • Tightening specification. Refer to the appropriate Service Information .
  7. Bolt
    • Only remove when the transmission mount must be separated from the transmission support
    • Tightening specification. Refer to the appropriate Service Information .
  8. Transmission Support
  9. Bolt
    • Tightening specification. Refer to the appropriate Service Information .
  10. Nut
    • Tightening specification. Refer to the appropriate Service Information .
scientia non olet · About LEMON Manuals