Overview - Engine Coolant Temperature Sensor
WARNING: This page is about a different car, the 2021 Audi A6 Quattro, 2020 Audi A6 Quattro, and 2019 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Clip
- Check for secure fit
- Engine Coolant Temperature Sensor on Radiator Outlet -G83-
- Attached version
- Removing and installing. Refer to Engine Coolant Temperature Sensor on Radiator Outlet -G83-, REMOVING AND INSTALLING .
- O-Ring
- Always replace after removing.
- Coat with coolant
- O-Rings
- Always replace after removing.
- Coat with coolant
- Engine Coolant Temperature Sensor -G62-
- On transmission side of the cylinder head
- Removing and Installing. Refer to Engine Coolant Temperature Sensor -G62-, REMOVING AND INSTALLING .
- Bolt
- 4 Nm + 45°
- Always replace after removing.
- Bolt
- 4.5 Nm
- Engine Coolant Temperature Sensor on Radiator Outlet -G83-
- Removing and Installing. Refer to Engine Coolant Temperature Sensor on Radiator Outlet -G83-, REMOVING AND INSTALLING .
- O-Rings
- Always replace after removing.
- Coat with coolant