Exhaust Gas Temperature Sensor, Removing And Installing, Fwd Vehicles: Removing
WARNING: This page is about a different car, the 2024 Audi Q3 and 2023 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
- Follow the safety precautions when working on the exhaust system. Refer to SAFETY PRECAUTIONS WHEN WORKING ON EXHAUST SYSTEM .
-- Loosen the left center underbody trim panel toward the exhaust system and push slightly downward. Refer to OVERVIEW - UNDERBODY TRIM PANELS .
-- Remove the connectors -1 and 2- from the bracket and disconnect them, and then free up the wire.
-- Remove the pre-particulate filter temperature sensor -arrow-.
-- Remove the post-particulate filter temperature sensor -arrow-.