OVERVIEW - Battery -A-, Q3 (0K3)
- Battery
- Checking. Refer to Battery, Checking .
- Removing and Installing. Refer to Battery -A-, REMOVING AND INSTALLING, Q3, 0K3 .
- Negative Terminal Cover
- Positive Terminal Cover
- Positive Cable
- With battery fuse panel
- Component Location Overview. Refer to COMPONENT LOCATION OVERVIEW - BATTERY FUSE PANEL, HIGH-VOLTAGE SYSTEM, 0K3 .
- Disconnecting and Connecting. Refer to Battery -A-, DISCONNECTING AND CONNECTING, Q3 (0K3) .
- Tightening specification: 5 Nm
- Wire
- For the Battery Monitoring Control Module -J367-
- Follow the sequence when connecting the ground cable. Refer to Connecting .
- Securing Strap
- Bolt
- 20 Nm
- Bolt
- Quantity: 3
- 20 Nm
- Battery Tray
- Removing and Installing. Refer to BATTERY TRAY, REMOVING AND INSTALLING, Q3, 0K3 .
- Central Venting System Hose
- Bracket
- Bolt
- 20 Nm
- Cap Nut
- 9 Nm
- Ground Wire
- With Battery Monitoring Control Module -J367-
- Disconnecting and Connecting. Refer to Battery -A-, DISCONNECTING AND CONNECTING, Q3 (0K3) .
- Removing and Installing. Refer to GROUND CABLE WITH Battery Monitoring Control Module -J367-, REMOVING AND INSTALLING, Q3, 0K3 .
- Tightening specification: 5 Nm