Flywheel, Removing And Installing: Removing

Fig 1: Identifying Dual-Mass Flywheel & Bolts

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

Risk of destroying the flywheel due to improper handling.

- Never remove the bolts with an air or impact wrench.

- When removing the bolts, make sure that the bolt head does not come in contact with the flywheel.

-- Turn the flywheel -A- so that the bolts -B- line up with the center of the holes -arrows-.

-- Place the Flywheel Retainer: 3067 into the hole on the cylinder block -B-.

Fig 2: Identifying Flywheel Retainer

Courtesy of AUDI OF AMERICA, LLC

-- Loosen and remove the bolts for the flywheel.