Air Intake Manifold From Heater And A/C Unit, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
-- Remove the front heater and A/C unit. Refer to HEATER AND A/C UNIT, REMOVING AND INSTALLING .
-- Remove the acoustic cover and insulation from the air intake manifold -C-. OVERVIEW - HEATER AND A/C UNIT
-- Mark the connector to the actuators on the air intake manifold and remove. Refer to OVERVIEW - ACTUATORS ON AIR INTAKE MANIFOLD .
-- Mark the routing of the wiring harness -A- on the air intake manifold -C- (or take a picture) and remove from the air intake manifold. Refer to OVERVIEW - HEATER AND A/C UNIT .
-- Remove the bolts -B-.
-- Disconnect the air intake manifold -C- from the heater and A/C unit evaporator housing -D-. Refer to OVERVIEW - HEATER AND A/C UNIT .