Front A/C Display Control Head -E87-, REMOVING AND INSTALLING, A4 AND A5: Removing

-- Switch off the ignition.

-- Remove the right instrument panel trim -A- with the Front A/C Display Control Head -E87- -B- from the instrument panel. Refer to OVERVIEW - INSTRUMENT PANEL .

Courtesy of AUDI OF AMERICA, LLC

-- If multiple identical in construction connectors are installed in this area, mark the connectors -C- and -D-.

TIP

• Depending on the versions of connectors -C- and -D- on the Front A/C Display Control Head -E87- this illustration shows the layout on a "Low" A/C system.

-- Loosen the locking mechanism -E- from the connectors -C- and -D- by pulling -arrow-.

-- Loosen the catch of the connectors -C- and -D- by pressing -arrow- and remove the connector.

-- If equipped remove the bolts -C-.

Courtesy of AUDI OF AMERICA, LLC

TIP

• Depending on the version (and in the case that the tabs -A- do not hold properly) the Front A/C Display Control Head -E87- -B- can also be secured with bolts -C- and the spring nuts -E- on the trim -D-.

-- Release the tabs -A- and loosen the Front A/C Display Control Head -E87- -B- from the trim -D-.