Rear Lid Adjusting Buffer
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
Removing
-- Loosen the rear lid lower trim panel near the adjusting buffer. Refer to REAR LID LOWER TRIM PANEL, REMOVING AND INSTALLING .
-- Turn the adjusting buffer -1- counter-clockwise -arrow- and remove it.
Installing
Install in reverse order of removal and note the following:
-- Check the seal -2- between the adjusting buffer and the rear lid for damage.
-- Adjust the adjusting buffer. Refer to HEIGHT, ADJUSTING USING ADJUSTING BUFFER .