Height, Adjusting Using Adjusting Buffer
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
- Adjustment dimensions. Refer to REAR LID, ADJUSTING .
Procedure
-- Install the adjusting screw -2- with the protective cap -1- all the way into the adjusting buffer -3- before adjusting the rear lid.
-- Remove the adjusting screw -2- just enough until the protective cap -1- rests on the adjusting buffer with light pretension when the rear lid is closed.
-- Check if the lid is without play and in a flush position by pressing or pulling at the side edges of the rear lid.
-- Repeat the adjustment if necessary.