Body Adjusting Buffer
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
Removing
-- Turn the adjusting buffer -1- counter-clockwise -arrow- to remove.
-- Remove the adjusting buffer locking mechanism -2- from the threaded pin.
Installing
Install in reverse order of removal and note the following:
TIP:
To secure the adjusting buffer, the Pop Rivet Screw: WHT 005 180 must be inserted using the Pop Rivet Pliers: VAG1765C and Pop Rivet Pliers - Supplement Pieces VAG1765C/2. Refer to the appropriate Service Information for detailed information. The >>infomedia search<< can be used here to search for the Pop Rivet Screw: WHT 005 180 in the respective article.
-- Adjust the adjusting buffer. Refer to HEIGHT, ADJUSTING USING ADJUSTING BUFFER .