Overview - Cover And Cushion, Bench Seat, A5 Coupe/SPORTBACK
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The bench seat without storage tray is shown.
- Seat Frame
- With the molded piece
- Upholstery Clip
- Always replace
- For securing the cover to the cushion
- Install at the same location with Upholstery Clip Pliers:VAG1634 .
- Wire
- Encapsulated in cushion
- For securing the cover to the cushion
- Contour Wire
- Sewn into cover
- For securing the cover to the cushion
- Cover
- Covers and Cushions, Removing and Installing. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, BENCH SEAT, A5 COUPE/SPORTBACK .
- Cover and Cushion, Separating. Refer to COVER AND CUSHION, SEPARATING, BENCH SEAT .
- Check that there are no folds after installing
- Molding
- Sewn into cover
- For engaging the cover to the seat frame
- Make sure it fits correctly in the seat frame
- Clamping Strip
- Sewn into cover
- For attaching the cover to the seat frame
- Flip over 180° and engage in the groove on the molded piece. Refer to Installing .
- Clip
- Cushion
- Covers and Cushions, Removing and Installing. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, BENCH SEAT, A5 COUPE/SPORTBACK .
- Cover and Cushion, Separating. Refer to COVER AND CUSHION, SEPARATING, BENCH SEAT .