Cover And Cushion, Removing And Installing, Bench Seat, A5 Coupe/SPORTBACK: Installing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
-- Engage the rear molding into the seat frame first, and then pull the cover tight.
-- Flip the protective strip -1- over 180° toward the inside in direction of -arrow A-.
-- Engage the protective strip in the groove on the molded part in direction of -arrow B-.