Front Seatback
-- Remove seat. Refer to FRONT SEAT, MANUAL .
-- Remove head restraint. Refer to REAR BACKREST ASSEMBLY OVERVIEW .
-- Remove seat back from seat frame. Refer to FRONT BACKREST ASSEMBLY OVERVIEW .
-- Pry cover reinforcement out of seatback cover with flat plastic wedge -arrow-.
-- Unscrew two securing bolts on underside of seat-back cover.
-- Remove seat-back cover downward.
-- Using pliers, as shown, press headrest guides together, and push out.
-- Fold over seat cover.
-- Cut through clips and remove seat cover.
-- Bend open upholstery hooks -1-.
-- Remove old clips.
-- Install new clips at same points with :VAG1634 or equivalent.
Rear Seat
-- Remove rear seat cushion. Refer to REAR SEAT CUSHION .
-- Cut through clips.
-- Fold over seat cover.
-- Cut through clips.
-- Remove seat cover.
-- Take out seat upholstery.
-- Remove old clips.
-- Install new clips at same points with :VAG1634 or equivalent.
Rear Seatback
-- Remove rear seat back. Refer to FRONT BACKREST ASSEMBLY OVERVIEW .
-- Remove center arm rest by unscrewing 4 securing bolts on seat back.
-- Cut through clips.
-- Fold over seat cover.
-- Cut through clips (as shown) and remove seat cover.
-- Remove old clips.
-- Install new clips at same points with :VAG1634 or equivalent.