Part III

WARNING: This page is about a different car, the 2024 Audi Q7 and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Part I. Refer to Part I .

Part II. Refer to Part II .

Fig 1: Exploded View Of Turbocharger, 3.0L Engine

Courtesy of AUDI

Bolt
- 9 Nm
Bracket
- For the vacuum diaphragm
Turbocharger
- Removing and Installing. Refer to TURBOCHARGER, REMOVING AND INSTALLING, 3.0L ENGINE .
Nut
- 9 Nm
Locking Spring
- Replace after removing
Ball Socket
Nut
- 8 Nm
Threaded Piece
Nut
- 8 Nm
Vacuum Diaphragm
- For the turbocharger
- Repair set. Refer to the appropriate Electronic Parts Information.
- Removing and Installing. Refer to TURBOCHARGER VACUUM DIAPHRAGM, REPLACING .
  Engine Cover Temperature SensorG765 - Tightening Specification
  
  Fig 2: Engine Cover Temperature Sensor -G765-
  Courtesy of AUDI
  
  -- Tighten the bolt -1- to 9 Nm.