Part I
WARNING: This page is about a different car, the 2024 Audi Q7 and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Part II. Refer to Part II .
Part III. Refer to Part III .
- Connecting Tube
- For the EVAP system
- O-Ring
- Replace after removing
- Turbocharger
- Removing and Installing. Refer to TURBOCHARGER, REMOVING AND INSTALLING .
- O-Ring
- Replace after removing
- Coat with coolant
- Coolant Supply Line
- Bolt
- 9 Nm
- O-Ring
- Check for damage and leaks and if necessary replace
- Recirculation Valve, Bank 1 -N625-
- Removing and Installing. Refer to RECIRCULATION VALVE, REMOVING AND INSTALLING, 3.0L ENGINE .
- Bolt
- 9 Nm
- Bolt
- Tightening specification -item 9- OVERVIEW - OIL FILTER .
- Bolt
- 9 Nm
- Oil Supply Line
- O-Ring
- Replace after removing
- Coat with engine oil
- O-Ring
- Replace after removing
- Coat with engine oil
- Bolt
- 9 Nm
- Coolant Return Line
- Bolt
- 9 Nm
- O-Ring
- Replace after removing
- Coat with coolant
- O-Ring
- Replace after removing
- Coat with coolant
- Bolt
- 9 Nm
- Venturi Injector
- Replace after removing
- Press in until it locks into place
- Plug
- 25 Nm
- Seal
- Replace after removing
- O-Ring
- Red
- Replace after removing
- O-Ring
- Green
- Replace after removing