Overview - Bumper Cover, Market-Specific Version
- Bolt
- Quantity: 4
- 5 Nm
- Bolt
- Quantity: 2
- 2 Nm
- End Panel
- The bumper cover
- Removing and Installing. Refer to BUMPER COVER END PLATE, REMOVING AND INSTALLING, BEFORE PRODUCT IMPROVEMENT .
- Impact Guard
- Equipped on some models
- Removing and Installing. Refer to IMPACT GUARD, REMOVING AND INSTALLING .
- Bumper Cover Lower Section
- Removing and Installing. Refer to BUMPER COVER LOWER SECTION, REMOVING AND INSTALLING .
- Connecting Piece
- Removing and Installing. Refer to CONNECTING PIECE FOR BUMPER COVER SIDE PANEL, REMOVING AND INSTALLING .
- Radiator Grille
- Overview. Refer to OVERVIEW - RADIATOR GRILLE .
- Air Intake Grille
- Center
- Removing and Installing. Refer to CENTER AIR INTAKE GRILLE, REMOVING AND INSTALLING, BEFORE PRODUCT IMPROVEMENT .
- Lock Carrier Cover
- Removing and Installing. Refer to LOCK CARRIER COVER, REMOVING AND INSTALLING .
- Bolt
- Quantity: 7
- 2 Nm
- Bolt
- Quantity: 2
- 2 Nm
- End Panel
- For the bumper cover side panel
- Removing and Installing. Refer to BUMPER COVER SIDE PANEL END PLATE, REMOVING AND INSTALLING, BEFORE PRODUCT IMPROVEMENT .
- Securing Strip
- For the bumper cover side panel/lower section
- Removing and Installing. Refer to SECURING STRIP FOR BUMPER COVER SIDE PANEL, REMOVING AND INSTALLING .
- Mount
- For the bumper cover side panel
- Removing and Installing. Refer to BUMPER COVER MOUNT, REMOVING AND INSTALLING .
- Bolt
- 2 Nm
- Expanding Rivet
- Bolt
- Quantity: 2
- 2 Nm
- Bumper Cover Side Panel
- Removing and Installing. Refer to BUMPER COVER SIDE PANEL, REMOVING AND INSTALLING .
- Bumper Cover, Removing and Installing. Refer to BUMPER COVER, REMOVING AND INSTALLING .
- Cover
Equipment versions with headlamp washer system
- Washer Nozzle Cover, Removing and Installing. Refer to HEADLAMP WASHER SYSTEM WASHER NOZZLE COVER, REMOVING AND INSTALLING
Equipment versions without headlamp washer system
- Blind cover, removing and installing. Refer to BLIND COVER IN BUMPER COVER, REMOVING AND INSTALLING .
- Washer Nozzle Cover, Removing and Installing. Refer to HEADLAMP WASHER SYSTEM WASHER NOZZLE COVER, REMOVING AND INSTALLING
- Bolt
- 2 Nm
- Clip
- Quantity: 2
- Cap
- For the air intake grille
- Equipped on some models
- Bolt
- 2 Nm
- Air Intake Grille
- Side
- Removing and Installing. Refer to SIDE AIR INTAKE GRILLE, REMOVING AND INSTALLING, BEFORE PRODUCT IMPROVEMENT .