Turbocharger, Removing And Installing: Removing
-- Install the engine cover and heat shield. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
-- Remove the crankcase ventilation hose -4- by pressing the release buttons on both sides.
-- Free up the wiring harness -3-.
-- Remove the bolts -arrows- and push the connection -2- to the left side.
-- Remove the upper air duct pipe. Refer to AIR DUCT PIPE, REMOVING AND INSTALLING .
-- Press the release buttons on both sides and disconnect the EVAP system hose -4-.
-- Remove the bolts -arrows- for the air guide pipe -1-.
-- Remove the bolt -3- and the line -2- for the EVAP system and move to the side.
Refer to TURBOCHARGER, REMOVING AND INSTALLING .