Stabilizer Bar, Removing And Installing, Without Sway Stabilization: Removing

TIP:

When installing, bring all cable ties back to the same position.

-- Versions with coil springs: determine the curb weight position. Refer to WHEEL BEARING, LIFTING TO CURB WEIGHT POSITION, VEHICLES WITH COIL SPRING .

-- Versions with air suspension: determine the standard vehicle height. Refer to WHEEL BEARING AT STANDARD VEHICLE HEIGHT, LIFTING VEHICLES WITH AIR SUSPENSION .

-- Remove the front noise insulation. Refer to OVERVIEW - NOISE INSULATION .

-- Remove the left and right nuts -arrows- and -3-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the left and right clamp -1- and bolt -4-.

-- Remove the stabilizer bar -2-.