LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 78 (Front Suspension) >> 40 Front Suspension >> Suspension Strut And Upper Control Arm >> Suspension Strut, Removing And Installing >> Installing

Suspension Strut, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

NOTE:

Procedures when installing a new air spring. Refer to SUSPENSION STRUT, FILLING .

-- Pay attention to the installation position:

Versions with Coil Springs after Replacing the Springs:

Versions with Air Suspension:

-- Fill the air suspension system. Refer to AIR SUSPENSION SYSTEM, FILLING AND BLEEDING .

-- Readapt the standard vehicle height. Refer to STANDARD VEHICLE HEIGHT, READAPTING .

Tightening Specifications