Right Coolant Pipe, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi Q8, 2021 Audi Q8, 2020 Audi Q8, and 2019 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .
-- Remove the right subframe shield. Refer to SUBFRAME SHIELD, REMOVING AND INSTALLING .
-- Remove the right drive axle heat shield. Refer to DRIVE AXLE HEAT SHIELD, REMOVING AND INSTALLING .
-- Remove the right drive axle from the transmission. Refer to DRIVE AXLE, REMOVING AND INSTALLING .
-- Place the container of the :VAS5014 or the :VAS6208 underneath.
-- Remove the bolt -2-.
-- Loosen the hose clamps -1 and 4- and remove the right coolant pipe -3-. (Shown with subframe removed.)