LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Wires) >> 97 Wires >> Wiring Harness And Connector Repairs >> Tool Descriptions >> Contact Release Tools

Contact Release Tools

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Various release tools are used to remove the different terminals from connector housing without damage.

Fig 1: Guiding Release Tool Into Release Channel
GWWN97-10290Courtesy of AUDI OF AMERICA, LLC

A selection of release tools are a component of the Wiring Harness Repair Set:VAS1978  and the Wiring Harness Repair Set:VAS1978A  . The Release Tool Set:VAS1978/35  contains the entire set of release tools. Refer to Release Tool Set .

WARNING:

Some tools are supplied with a tool safety clip, which is slid over the tool points after using the tool, in order to protect other workers from injuries and tool points from damage.

Connector housings, unlocking and disassembling. Refer to CONNECTOR HOUSINGS, RELEASING AND DISASSEMBLING .