LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Wires) >> 97 Wires >> Wiring Harness And Connector Repairs >> Wiring Harness Repair Set >> Release Tool Set:VAS1978/35

Release Tool Set:VAS1978/35

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

The Release Tool Set:VAS1978/35  is used to release the various primary and secondary locking mechanisms on VW-group vehicles. The set consists of 26 different tools which can be used to professionally release or assemble e.g. round connector systems, flat terminals with one or two locks as well as single wire seals.

Fig 1: Identifying Release Tool Set (VAS 1978/35)
GWWW00-10402Courtesy of AUDI OF AMERICA, LLC

The allocation of the correct release tools to the respective locking mechanisms can be found in the table in the Release Tool Set:VAS1978/35  Operating Instructions.