LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Wheels, Tires, Wheel Alignment (Suspension, Wheels, Steering)) >> 44 Wheels, Tires, Wheel Alignment >> Axle Alignment >> Standard Vehicle Height For Axle Alignment On Vehicles With Air Suspension, Checking >> Notes

Standard Vehicle Height For Axle Alignment On Vehicles With Air Suspension, Checking: Notes

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Checking the Standard Vehicle Height for Axle Alignment

Before performing an axle alignment on a vehicle with air suspension, check the standard vehicle height and adapt it again if necessary.

-- Initiate and lock the standard vehicle height. Refer to STANDARD VEHICLE HEIGHT, INITIATING AND LOCKING .

Determine the Dimension -a-.

Fig 1: Determining Height Dimension -a-
GWWA44-10192Courtesy of AUDI

-- Determine dimension -a- between the center of the wheel and the lower edge of the fender/wheel housing as shown.