Standard Vehicle Height, Initiating And Locking
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Vehicle Diagnostic Tester
Procedure
- Determine the correct suspension version. Refer to PRODUCTION CONTROL NUMBER (PR NUMBER) EXPLANATIONS .
-- Connect the Vehicle Diagnostic Tester.
-- Switch the ignition on.
-- Select and start the Diagnostic operating mode.
-- Select the Test plan tab.
-- Select the Select individual test button and select the following tree structure consecutively:
- Chassis
- Suspension control
- 0001 - OBD-capable systems
- 0074 - Drivetrain Control Module J775
- 0074 - Drivetrain Control Module functions
- 0074 - Basic Setting
- 0074 - Basic setting, move to standard vehicle height and lock
-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.
- If the basic setting "0074 - Basic setting initiated and lock standard vehicle height" has been activated, then basic setting "0074 - Basic setting activate regulation" must be performed.