Height Adjustment at Striker:
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Screw in the adjusting buffer all the way. Refer to HEIGHT, ADJUSTING USING ADJUSTING BUFFER .
-- Loosen the clip -4- by pulling out.
-- Adjust the striker -1- by turning the adjusting screw -5- -b arrows-.
- During the closing test, the hood must fall from the balance position into the latch and engage completely.
-- Adjust the striker height if necessary.
-- Push the clip back on the striker.