Component Location Overview - Relay Panels, Fuse Panels, E-Boxes, Right FOOTWELL, 0K3, 0K4
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
- Wire Junction
- Wire Junction -TV1- (0K4)
- Terminal 30 Wire Junction 3 -TV28-
- Removing and installing. Refer to WIRE JUNCTION AND TERMINAL 30 WIRE JUNCTION 3 -TV1- / -TV28-, REMOVING AND INSTALLING, 0K3, 0K4 .
- Positive Cable
- From the battery
- Tightening specification: 9 Nm
- Connector
- Not Installed
- Not Installed
- Line
- Allocation. Refer to the appropriate Wiring Diagram.
- Nut
- 9 Nm
- Nut
- 9 Nm
- Nut
- 9 Nm
- Nut
- 9 Nm
- Nut
- 9 Nm
- Line
- Allocation. Refer to the appropriate Wiring Diagram.
- Line
- Allocation. Refer to the appropriate Wiring Diagram.
- Tightening specification: 20 Nm
- Line
- Allocation. Refer to the appropriate Wiring Diagram.
- Line
- Allocation. Refer to the appropriate Wiring Diagram.
- Line
- Allocation. Refer to the appropriate Wiring Diagram.
- Nut
- Quantity: 2
- 3 Nm
- Main Fuse Panel
- Tightening specifications of the wires. Refer to Figure.
- Removing and installing. Refer to MAIN FUSE PANEL ON Battery -A-, REMOVING AND INSTALLING .
- Battery
- Overview. Refer to OVERVIEW - Battery -A-. .