LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Communication (Infotainment - Hazard Alarm Systems)) >> 91 Communication >> Rearview Camera System >> Rearview Camera -R189-, REMOVING AND INSTALLING

Rearview Camera -R189-, REMOVING AND INSTALLING

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

The Rearview Camera -R189- is integrated inside the rear lid handle button. The Rearview Camera -R189- cannot be replaced separately.

-- If replacing the rearview camera, select the "Replace control module" function for the corresponding control module on the Vehicle Diagnostic Tester .

-- Remove and install the Release Button in Rear Lid Handle -E234-. Refer to COMPONENT LOCATION OVERVIEW - CONTROLS IN LUGGAGE COMPARTMENT .

-- Perform the calibration. Refer to REARVIEW CAMERA SYSTEM, CALIBRATING .