Overview - Heater Core For Heat Pump Operation With Refrigerant Receiver
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
- Refrigerant Receiver
- Removing and Installing. Refer to REFRIGERANT RECEIVER, REMOVING AND INSTALLING .
- If the component is replaced, the quantity of refrigerant oil in the old parts must be added to the new part as fresh refrigerant oil. Refer to Refrigerant Circuit Components, Replacing or A/C SYSTEM, OPERATING AFTER CHARGING .
- Bolt
- 8 Nm
- Guide Sleeve
- Bracket
- Nut
- Bracket
- Remains installed in the vehicle
- Removing and Installing. Refer to HEATER CORE FOR HEAT PUMP OPERATION WITH REFRIGERANT RECEIVER, REMOVING AND INSTALLING .
- Bolts
- 10 Nm
- Rubber Bushing
- Bolt
- 8 Nm
- O-Ring
- Replace after removing; version. Refer to REFRIGERANT CIRCUIT SEALS and the Parts Information.
- Lubricate lightly with refrigerant oil before installing
- Heat Exchanger for Heat Pump Operation
- Removing and Installing. Refer to HEATER CORE FOR HEAT PUMP OPERATION WITH REFRIGERANT RECEIVER, REMOVING AND INSTALLING .
- If the component is replaced, the quantity of refrigerant oil in the old parts must be added to the new part as fresh refrigerant oil. Refer to Refrigerant Circuit Components, Replacing or A/C SYSTEM, OPERATING AFTER CHARGING .
- Bolts
- 8 Nm