LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 314 (Seat Upholstery, Covers) >> 74 Seat Upholstery, Covers >> Rear Seat Covers And Cushions >> Side Cushion, Removing And Installing >> Side Cushion Without Thorax Airbag, Removing And Installing >> Removing

Side Cushion Without Thorax Airbag, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

-- Fold the rear seat backrest slightly forward.

-- Remove the railing trim. Refer to OVERVIEW - D-PILLAR TRIM PANEL .

-- Remove the bolt -arrow-.

GWWA74-10817Courtesy of AUDI

-- Unclip the side cushion -1- from the wheel housing trim panel and remove upward -direction of the arrow- from the clip -2-.