Overview - Seat Pan

WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

Overview - Seat Pan Adjustment. Refer to OVERVIEW - SEAT PAN ADJUSTMENT .

Courtesy of AUDI

Mount
- For the fire extinguisher
- Equipment version: front passenger seat only
- Removing and installing. Refer to FIRE EXTINGUISHER BRACKET, REMOVING AND INSTALLING .
Bolt
- Quantity: 2
- 8 Nm
Bolt
- Quantity: 4
- 7.5 Nm
Bracket
- For the fire extinguisher
- Seats without Seat Depth Adjuster
- Equipment version: front passenger seat only
- Removing and installing. Refer to FIRE EXTINGUISHER BRACKET, REMOVING AND INSTALLING .
Bracket
- For the fire extinguisher
- Seats with Seat Depth Adjuster
- Equipment version: front passenger seat only
- Removing and installing. Refer to FIRE EXTINGUISHER BRACKET, REMOVING AND INSTALLING .
Bolt
- Quantity: 2
- 3.5 Nm
Bolt
- 3.5 Nm
Retaining Bracket
- Quantity: 2
Trim
- For the seat depth adjustment
- Quantity: 2
- pull off forward
Seat Depth Adjuster Support
- Removing and installing. Refer to SEAT DEPTH ADJUSTER SUPPORT, REMOVING AND INSTALLING .
Cover
- Front for seat rail
- Quantity: 2
- Removing and installing. Refer to FRONT AND REAR SEAT RAIL COVER, REMOVING AND INSTALLING .
Cover
- For the seat depth adjustment
- Clip into the seat depth adjuster support
Seat Depth Adjuster
- Removing and installing. Refer to SEAT DEPTH ADJUSTER, REMOVING AND INSTALLING .
Bolt
- Quantity: 2
- 2.5 Nm
Expanding Clip
Bracket
- for seat bolster inflation adjuster
- Quantity: 2
- With air cushion for seat bolster inflation adjuster
- Removing and installing. Refer to SEAT BOLSTER ADJUSTER AIR CUSHION, REMOVING AND INSTALLING .
Upholstery Wire
- For the seat pan
- Quantity: 2
Seat Frame Trim Panel
- Tunnel-side
- Removing and installing. Refer to TUNNEL-SIDE SEAT FRAME TRIM PANEL, REMOVING AND INSTALLING .
Expanding Clip
Seat Pan
- Disassembling and assembling. Refer to SEAT PAN, DISASSEMBLING AND ASSEMBLING .
Bracket
- For the footwell lamp
- Clip into the seat pan
Child Seat Anchor
- Equipment version: front passenger seat only
- Replace damaged or deformed child seat anchor
- Overview. Refer to OVERVIEW - FRONT CHILD SEAT ANCHORS .
Seat Cushion Fan
- Driver Seat Cushion Blower Fan -V390-, Front Passenger Seat Cushion Blower Fan -V391-
- Removing and installing. Refer to FRONT SEAT FAN, REMOVING AND INSTALLING, SEAT CUSHION .
Rubber Bracket
- for blower fan
- Quantity: 4
- Insert in the seat pan
Protective Cap
- for blower fan
- Removing and installing. Refer to FRONT SEAT FAN, REMOVING AND INSTALLING, SEAT CUSHION .
Pop Rivet
- Quantity: 2
Cover
- Rear for seat rail
- Quantity: 2
- Removing and installing. Refer to FRONT AND REAR SEAT RAIL COVER, REMOVING AND INSTALLING .
Cover
- Lower center side for seat rail
- Removing and installing. Refer to LOWER CENTER SEAT RAIL COVER, REMOVING AND INSTALLING .
Bracket
- For the seat frame trim panel
- Seats with manual seat adjustment
- Removing and installing. Refer to SEAT FRAME TRIM PANEL ON SIDE SILL SIDE, REMOVING AND INSTALLING .
Bolt
- Quantity: 3
- 7.5 Nm
Bracket
- For the seat frame trim panel
- Seats with power seat adjustment
- Removing and installing. Refer to SEAT FRAME TRIM PANEL ON SIDE SILL SIDE, REMOVING AND INSTALLING .
Bolt
- Quantity: 5
- 1 Nm
Bracket
- Clip into the seat frame trim panel
Seat Frame Trim Panel
- Side Sill Side
- Removing and installing. Refer to SEAT FRAME TRIM PANEL ON SIDE SILL SIDE, REMOVING AND INSTALLING .
Expanding Clip
Actuator
- For power seat adjustment
- Removing and installing. Refer to DRIVER/FRONT PASSENGER SEAT ADJUSTMENT CONTROL HEAD -E470- / -E471-, REMOVING AND INSTALLING .
Cover
- Upper center side for seat rail
- Removing and installing. Refer to UPPER CENTER SEAT RAIL COVER, REMOVING AND INSTALLING .
Expanding Clip
Seat Adjustment Control Head
- For power seat adjustment
- Driver Seat Adjustment Control Head -E470-, Front Passenger Seat Adjustment Control Head -E471-
- Removing and installing. Refer to DRIVER/FRONT PASSENGER SEAT ADJUSTMENT CONTROL HEAD -E470- / -E471-, REMOVING AND INSTALLING .
Bolt
- Quantity: 3
- 7.5 Nm
Switch/Switch Module for Front Seat
- Equipped on some models: for power seat adjustment, vehicles without massage function
- Driver Seat Lumbar Support Adjustment Switch - E176-, Front Passenger Seat Lumbar Support Adjustment Switch -E177-
- Equipped on some models: for power seat adjustment, vehicles with massage function
- Driver Seat Switch Module -E663-, Front Passenger Seat Switch Module -E664-
- Removing and installing. Refer to FRONT SEAT SWITCH/SWITCH MODULE, REMOVING AND INSTALLING .
Bracket
- For the control module
- Equipped on some models: for power adjustable standard seat
- Removing and installing. Refer to SEAT FRAME TRIM PANEL/CONTROL MODULE/COMPRESSOR BRACKET, REMOVING AND INSTALLING .
Seat Forward/Back Adjustment Handle
- Overview. Refer to OVERVIEW - SEAT PAN ADJUSTMENT .
Bracket
- For seat frame trim panel/control module/compressor
- Removing and installing. Refer to SEAT FRAME TRIM PANEL/CONTROL MODULE/COMPRESSOR BRACKET, REMOVING AND INSTALLING .
Bolt
- Quantity: 9
- 6.5 Nm
Seat Frame Trim Panel
- Front
- Removing and installing. Refer to FRONT SEAT FRAME TRIM PANEL, REMOVING AND INSTALLING .