Suspension Strut, Removing And Installing: Installing

WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

Note the procedures when installing a new air spring. Refer to SUSPENSION STRUT, FILLING .

-- Pay attention to the installation position:

Refer to Figure
Refer to Figure
Refer to Figure
Refer to Figure

Versions with Coil Springs after Replacing the Springs:

Adjust the headlamps. Refer to HEADLAMP, ADJUSTING .
Driver Assistance Systems Front Camera, Calibrating. Refer to DRIVER ASSISTANCE SYSTEMS FRONT CAMERA, CALIBRATING .
Infrared System, Calibrating. Refer to INFRARED SYSTEM, CALIBRATING .

Versions with Air Suspension:

-- Fill the air suspension system. Refer to AIR SUSPENSION SYSTEM, FILLING AND BLEEDING .

-- Readapt the standard vehicle height. Refer to STANDARD VEHICLE HEIGHT, READAPTING .

Tightening Specifications

Refer to OVERVIEW - SUSPENSION STRUT AND UPPER CONTROL ARM
Refer to OVERVIEW - LOWER CONTROL ARM AND BALL JOINT