Air Suspension System, Filling And Bleeding
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Vehicle Diagnostic Tester
Bleeding
-- If the air suspension system is bled, select the "Air Suspension System, Bleeding" program. Refer to DIAGNOSTIC ENTRIES .
-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.
Filling
-- To fill, proceed in the same way under "Air Suspension System, Filling". Refer to DIAGNOSTIC ENTRIES .
- Note the installation position of the air springs when filling them Refer to Fig 1.