Exhaust Gas Temperature Sensors -G495- / -G497-, Removing And Installing, 3.0L Engine: Removing

WARNING: This page is about a different car, the 2022 Audi Q8, 2021 Audi Q8, 2020 Audi Q8, and 2019 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

Exhaust Gas Temperature Sensor 3 -G495- Cylinder Bank 1 (Right)

Courtesy of AUDI OF AMERICA, LLC

-- Remove the connector -2- from the bracket, disconnect it, and free up the wire.

CAUTION:

There is a risk of burn injuries due to a hot exhaust system.

Possible to burn hands and other parts of the body.

- Allow the exhaust system to cool.

-- Remove the Exhaust Gas Temperature Sensor 3 - G495- -1- with a suitable tool from the : T10395B .

Exhaust Gas Temperature Sensor 3 Bank 2 - G497- cylinder bank 2 (left)

Courtesy of AUDI OF AMERICA, LLC

-- Remove the connector -1- from the bracket, disconnect it, and free up the wire.

CAUTION:

There is a risk of burn injuries due to a hot exhaust system.

Possible to burn hands and other parts of the body.

- Allow the exhaust system to cool.

-- Remove the - G497- -2- with a suitable tool from the : T10395B .