Turbocharger Vacuum Diaphragm, Replacing, 3.0L Engine: Removing
WARNING: This page is about a different car, the 2022 Audi Q8, 2021 Audi Q8, 2020 Audi Q8, and 2019 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the engine cover and heat shield. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- Remove the oil filter element. Refer to ENGINE OIL .
-- Remove the vacuum hose -1- from the vacuum diaphragm at the same time do not damage it.
-- Remove the locking spring -3- and control rod from the turbocharger operating lever -4-.
-- Remove the nuts -2 and 5- and remove the vacuum diaphragm.