Overview - Rear Seat Backrest, Third Row Backrest
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Expanding Clip
- Seat Frame Trim Panel
- Tunnel-side
- Removing and Installing. Refer to TUNNEL-SIDE SEAT FRAME TRIM PANEL, REMOVING AND INSTALLING, THIRD ROW .
- Rear Seat Backrest
- North American version with mounts for seat belts left and right, secured with rivets. If the rear seat backrest is replaced, drill out the left and right rivets. Mounts do not need to be riveted on the new rear seat backrest.
- Removing and Installing. Refer to THIRD ROW SEAT, REMOVING AND INSTALLING .
- Cover
- For the upper child seat anchor
- Press into the seat frame until it engages audibly.
- Removing and Installing. Refer to UPPER CHILD SEAT ANCHOR COVER, REMOVING AND INSTALLING, SECOND AND THIRD ROW .
- Backrest Hinge Cover
- Removing and Installing. Refer to BACKREST HINGE COVER, REMOVING AND INSTALLING .
- Seat Frame Trim Panel
- Side Sill Side
- Removing and Installing. Refer to SEAT FRAME TRIM PANEL ON SIDE SILL SIDE, REMOVING AND INSTALLING, THIRD ROW .
- Cap
- For the child seat anchor
- Quantity: 4
- Must be secure in the anchor
- Removing and Installing. Refer to LOWER CHILD SEAT ANCHOR GUIDE, REMOVING AND INSTALLING, SECOND AND THIRD ROW .
- Guide
- for the lower child seat anchor
- Quantity: 4
- Must be secure in the anchor
- Removing and Installing. Refer to LOWER CHILD SEAT ANCHOR GUIDE, REMOVING AND INSTALLING, SECOND AND THIRD ROW .