Overview - Seat Pan

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Overview - Seat Bolster Inflation Adjuster. Refer to OVERVIEW - SEAT BOLSTER INFLATION ADJUSTER .
Overview - Controls for Power Seat Adjustment. Refer to OVERVIEW - CONTROLS FOR POWER SEAT ADJUSTMENT .

Courtesy of AUDI

Mount
- For the fire extinguisher
- Equipment version: front passenger seat only
- Removing and Installing. Refer to FIRE EXTINGUISHER BRACKET, REMOVING AND INSTALLING .
Bolt
- Quantity: 2
- 8 Nm
Bolt
- Quantity: 4
- 7.5 Nm
Bracket
- For the fire extinguisher
- Seats without seat depth adjuster
- Equipment version: front passenger seat only
- Removing and Installing. Refer to FIRE EXTINGUISHER BRACKET, REMOVING AND INSTALLING .
Bracket
- For the fire extinguisher
- Seats with seat depth adjuster
- Equipment version: front passenger seat only
- Removing and Installing. Refer to FIRE EXTINGUISHER BRACKET, REMOVING AND INSTALLING .
Bolt
- Quantity: 2
- 3.5 Nm
Bolt
- 3.5 Nm
Retaining Bracket
- Quantity: 2
Trim
- For the seat depth adjustment
- Quantity: 2
- pull off forward
Seat Depth Adjuster Support
- Removing and Installing. Refer to SEAT DEPTH ADJUSTER, REMOVING AND INSTALLING .
Cover
- Front for seat rail
- Quantity: 2
- Removing and Installing. Refer to FRONT AND REAR SEAT RAIL COVER, REMOVING AND INSTALLING .
Cover
- For the seat depth adjustment
- Clip into the seat depth adjuster support
Seat Depth Adjuster
- Removing and Installing. Refer to SEAT DEPTH ADJUSTER, REMOVING AND INSTALLING .
Bolt
- Quantity: 2
- 2.5 Nm
Expanding Clip
Bracket
- for seat bolster inflation adjuster
- Quantity: 2
- With air cushion for seat bolster inflation adjuster
- Removing and Installing. Refer to SEAT BOLSTER INFLATION ADJUSTER AIR CUSHION, REMOVING AND INSTALLING .
Upholstery Wire
- For the seat pan
- Quantity: 2
Seat Side Trim
- Tunnel-side
- Removing and Installing. Refer to SEAT SIDE TRIM ON TUNNEL SIDE, REMOVING AND INSTALLING .
Expanding Clip
Seat Pan
- Disassembling and assembling. Refer to SEAT PAN, DISASSEMBLING AND ASSEMBLING .
Bracket
- For the footwell lamp
- Clip into the seat frame
Child Seat Anchor
- Equipment version: front passenger seat only
- Replace damaged or deformed child seat anchor
- Overview. Refer to OVERVIEW - FRONT CHILD SEAT ANCHORS .
Driver Seat Cushion Blower Fan -V390-
- Equipped on some models
- Front passenger side: Front Passenger Seat Cushion Blower Fan -V391-
- Removing and Installing. Refer to FRONT SEAT FAN, REMOVING AND INSTALLING .
Rubber Bracket
- for blower fan
- Quantity: 4
- Insert in the seat pan
Protective Cap
- for blower fan
- Removing and Installing. Refer to FRONT SEAT FAN, REMOVING AND INSTALLING .
Pop Rivet
- Quantity: 2
Cover
- Rear for seat rail
- Quantity: 2
- Removing and Installing. Refer to FRONT AND REAR SEAT RAIL COVER, REMOVING AND INSTALLING .
Cover
- Lower center side for seat rail
- Removing and Installing. Refer to LOWER CENTER SEAT RAIL COVER, REMOVING AND INSTALLING .
Bracket
- for seat side trim
- Seats with manual seat adjustment
- Removing and Installing. Refer to SEAT SIDE TRIM ON SIDE SILL SIDE, REMOVING AND INSTALLING .
Bolt
- Quantity: 3
- 7.5 Nm
Bracket
- for seat side trim
- Seats with power seat adjustment
- Removing and Installing. Refer to SEAT SIDE TRIM ON SIDE SILL SIDE, REMOVING AND INSTALLING .
Bolt
- Quantity: 5
- Tightening specification OVERVIEW - CONTROLS FOR POWER SEAT ADJUSTMENT
Bracket
- Clipped in the seat side trim
Seat Side Trim
- Side Sill Side
- Removing and Installing. Refer to SEAT SIDE TRIM ON SIDE SILL SIDE, REMOVING AND INSTALLING .
Expanding Clip
Actuator
- For power seat adjustment
- Removing and Installing. Refer to DRIVER/FRONT PASSENGER SEAT ADJUSTMENT CONTROL HEAD -E470- / -E471-, REMOVING AND INSTALLING .
Cover
- Upper center side for seat rail
- Removing and Installing. Refer to UPPER CENTER SEAT RAIL COVER, REMOVING AND INSTALLING .
Expanding Clip
Driver Seat Adjustment Control Head -E470-
- Equipped on some models
- Front passenger side: Front Passenger Seat Adjustment Control Head -E471-
- Overview. Refer to OVERVIEW - CONTROLS FOR POWER SEAT ADJUSTMENT .
Bolt
- Quantity: 3
- 7.5 Nm
Driver Seat Lumbar Support Adjustment Switch -E176- or Driver Seat Switch Module -E663-
- Overview. Refer to OVERVIEW - CONTROLS FOR POWER SEAT ADJUSTMENT .
- Equipped on some models
- Front passenger side: Front Passenger Seat Lumbar Support Adjustment Switch - E177-, Front Passenger Seat Switch Module -E664-
Bracket
- For the control module
- Equipped on some models: for power adjustable standard seat
- Removing and Installing. Refer to SEAT SIDE TRIM/CONTROL MODULE/COMPRESSOR BRACKET, REMOVING AND INSTALLING .
Seat Forward/Back Adjustment Handle
- Overview. Refer to OVERVIEW - SEAT BOLSTER INFLATION ADJUSTER .
Bracket
- For seat side trim/control module/compressor
- Removing and Installing. Refer to SEAT SIDE TRIM/CONTROL MODULE/COMPRESSOR BRACKET, REMOVING AND INSTALLING .
Bolt
- Quantity: 9
- 6.5 Nm
Seat Side Trim
- Front
- Removing and Installing. Refer to FRONT SEAT TRIM, REMOVING AND INSTALLING .