LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 172 (Exterior Equipment) >> 66 Exterior Equipment >> Radiator Grille/Front Trim >> Cover, Removing And Installing >> Removing

Cover, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Vehicles with radiator shutter:

-- Remove the bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

Vehicles without radiator shutter:

-- Remove the lock carrier cover. Refer to LOCK CARRIER COVER, REMOVING AND INSTALLING .

-- Remove the upper air duct. Refer to OVERVIEW - RADIATOR/RADIATOR FAN - 2.0L , OVERVIEW - RADIATOR/RADIATOR FAN - 3.0L .

Continuation:

Center Cover:

GWWA66-12488Courtesy of AUDI

-- Remove the bolts -arrows-.

-- Remove the center cover -1-.

Right Cover:

GWWA66-12489Courtesy of AUDI

-- Remove the bolts -arrows-.

-- Remove the right cover -1-.