LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 172 (Exterior Equipment) >> 66 Exterior Equipment >> Moldings, Trims, Extensions And Trim Panels >> Drip Rail Clamping Strip, Removing And Installing >> Installing

Drip Rail Clamping Strip, Removing And Installing: Installing

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Start riveting the clamping strip -1- at the topmost hole.

GWWA66-11642Courtesy of AUDI

Installation Instructions. Refer to OVERVIEW - DRIP RAIL .

scientia non olet · About LEMON Manuals